Bambu Lab P1S Combo vs Bambu Lab X1 Carbon Combo
Bambu Lab P1S Combo vs Bambu Lab X1 Carbon Combo: 4 stored specs differ: 1 ranked (max bed temperature), 1 measured differently, 2 listed for one model only. Bambu Lab X1 Carbon Combo leads on the one ranked spec (max bed temperature); the other differences are not ranked.
Side by side
4 rows differ, 6 are identical
| Bambu Lab P1S Combo3D printers | Bambu Lab X1 Carbon Combo3D printers | |
|---|---|---|
| Price and delivery | ||
| Lowest listed priceDiffers | €747.39Lowest | €1,722.43 |
| Delivered total | Not stated | Not stated |
| Sellers listing it | 1 | 1 |
| Delivery | Not stated | Not stated |
| Checked | ||
| Specifications | ||
| Build volume X | 256 mm | 256 mm |
| Build volume Y | 256 mm | 256 mm |
| Build volume Z | 256 mm | 256 mm |
| Enclosure | Yes | Not stated |
| Max hotend temperature | 300 °C | 300 °C |
| Max bed temperatureDiffers | 100 °C | 110 °CHighest |
| Max speed | 500 mm/s | 500 mm/s |
| Auto bed leveling | Yes | Not stated |
| Direct drive | Not stated | Not stated |
| Multi material | AMS | AMS |
| Supported materials 1Differs | PLA, PETG, TPU, PVA, PET, ABS, ASA, PA, PC | PLA, PETG, TPU, ABS, ASA, PVA, PET |
| Noise | Not stated | Not stated |
| Connectivity | Not stated | Not stated |
| Release year | Not stated | Not stated |
- Measured differently: Ideal: PLA, PETG, TPU, PVA, PET, ABS, ASA. Capable: PA, PC versus Page also lists PA, PC and carbon or glass fiber reinforced polymer as 'Ideal for'.
Rows marked Differs have two or more different known values; the best known value is set in medium weight and marked Lowest or Highest when higher or lower is clearly better. A dash is unknown, not zero.
Fit by use case
- Best 3D printer for beginners
- Best 3D printer under 250
- Best 3D printer under 300
- Best 3D printer under 500
- Best enclosed 3D printer
- Best 3D printer for a small apartment
- Best large 3D printerBambu Lab P1S Combo: does not, Bambu Lab X1 Carbon Combo: does not
- Best multicolor 3D printer
- Best fast 3D printer
- Best 3D printer for ABS and nylon